Fire Alarm Control Panel (FACP)

Our integrated circuits and reference designs can help you leverage innovative features such as addressing capabilities, advanced human-machine interface (HMI), hot swappable expansion modules, and modular architecture to create a fire alarm control panel (FACP).

FACP design typically requires:

Power factor correction, higher efficiency/thermal efficiency, and compliance with EMC/EMI standards.

Realize lead-acid battery charging through seamless power switching.

Multiple communication protocols suitable for wired (Ethernet, RS-485, RS-232, USB) and wireless interfaces.

Transmit power and commands to the loop power supply equipment through a single line.

Mechanical relay reliability.

Related products

Brushed DC (BDC) motor driver (1)

DRV8251

50V, 4.1A H-bridge motor driver with integrated current regulation and locking OCP function

Universal operational amplifier (6)

TLV9351

Single, 40-V, 3.5-MHz, low-power operational amplifier

LM324LV

Four way, 5.5V, 1MHz, 3mV offset voltage operational amplifier

LPV801

Single, 5.5-V, 8-kHz, ultra low quiescent current (450-nA), 1.6-V min supply, RRO op amp

TL081H

The new product has a single channel, 40V, 5.25MHz, 4mV offset voltage, 20V/µ s operational amplifier with an operating temperature range of -40 ° C to 125 ° C and an input close to V+

LM324A

Quad, 30-V, 1.2-MHz, 3-mV offset voltage operational amplifier

TLV2462A

Dual, 6-V, 6.4-MHz, 1.5-mV offset, RRIO operational amplifier

Current detection amplifier analog output (2)

INA186

40V bidirectional high-precision current detection amplifier with picoampere input bias current and enable pins

INA169

2.7V to 60V, 440kHz variable gain current sensing amplifier